Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 275)

KARRERA — User Manual 275
ME Split Mode Operation
Partition Boundary
The ME mode (Normal, Prog CF, and Layered Mode when in Split mode),
output, and any secondary assignment information is stored as partition
boundary information in the E-MEM system itself. This makes it possible
to change an ME’s mode with an E-MEM recall. This partition boundary
information is maintained as a separate component to permit isolation
between Primary and Secondary partitions. See Partition Boundary Control
on page 276 .
Split ME E-MEM Level Assignments
When an ME is split, essentially two separate E-MEM systems are created.
The primary partition is always associated with its own E-MEM level. The
secondary partition is part of the PART Level and becomes enabled when
the ME is placed into Split Mode. These settings affect how each split ME’s
Local E-MEM area and how the Master E-MEM area is used to enact
E-MEM control of the MEs.
ME Partitions Menu
The ME Partitions menu is accessed by touching User Setups , Suite Prefs ,
E-MEM Prefs , ME Partitions ( Figure 148 ).
Figure 148. ME Partitions Menu