Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 82)

82 KARRERA — User Manual
Section 3 — Video Mix/Effects
include Crop. Multi-Functions of other iDPM settings, i.e. Shadow, Kurl,
and Lighting are not affected.
Clear All – Sets all transform parameters and all other menu settings,
including Crop values, of the delegated keyer to Default Keyframe values.
Note Corner Pinning is a function of i/eDPM and is an advanced operation. For
operation information see Corner Pinning
on page 279 .
Border Menu
The DPM Border feature provides an independently controlled border for
each licensed iDPM/eDPM. The borders are added "outside" of normal
blanking. This means that when a border is added it does not crop into the
original image so a border can be added to a full-sized image and it will not
be visible until the image size is slightly reduced.
The following controls are provided from the menu for each DPM:
• Width and softness for border top, bottom, left and right side can be
controlled independently or all together,
• Color (hue, saturation, and brightness),
• Choice of square or rounded border corners (including control of the
curve tension, continuity, and bias), and
• S-Linear, Linear, Curve, and Path Hold.
Border Edge Adjustments
To adjust the border edges together, perform the following.
1. Access the Borders Menu by touching iDPM , Borders ( Figure 37 ).