Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 130)

130 KARRERA — User Manual
Section 4 — Switcher Control
Recalling Registers
The Karrera system is optimized for rapid effects recall, generally accom-
plished with a single keystroke.
Note If recalling effects from the Master E-MEM area with Auto Recall off, you first
need to specify which levels you wish to control with the Enable buttons.
Recall a Register in the Current Bank
1. Press the E-MEM area keypad number of the desired register.
Recall a Register from a Different Bank
1. Press the Page button (if necessary).
2. Press the button for the desired page: 0, 100-900 (alternatively, you can
use the
Bk0/4 - Bk3/7 buttons on the right).
3. Press the Bank button.
4. Press the button of the desired bank.
5. Press the keypad button of the desired E-MEM register.
Alternatively, you can perform the Bank, then Page selections, then press
the desired register button.
Clearing Registers
When you build an effect you may want to start with an empty register.
This can be done in the E-MEM & Timeline, Register Ops menu.
To Clear the Current Register
1. Touch the Clear Current Reg button, bottom left of the keypad (lower right
of menu).
To Clear a Different Register
1. Touch the Clear button (left side of menu).
2. Using the keypad, enter the register number to be cleared and touch
Enter .