Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 65)

KARRERA — User Manual 65
MEs and Keyers
To Perform a Split Key:
1. Touch Source Ops, MEs in the Karrera menu.
2. Touch the Cut signal data pad for the Keyer you wish to split
(highlights blue).
3. Select a source from the scrolling Source List (right) and touch that
source.
The ME Status display in the Transition area shows the source names of
any key cut signals.
Note Split Key will be shown in the Multi-Function area display.
Keyer Priority
Video switchers with only two keyers per ME use a simple key over/key
under mechanism to control the stacking of the keys. Only one key can be
located over the other. The Karrera system has six keyers per ME, so more
complex stacking is possible. Keys can be placed between other keys, using
key priority.
To Change the Current Keyer Priority:
1. Go to the Keyer-Priority menu in the Menu Panel by pressing Keyer ,
Priority ( Figure 27 ).