Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 129)

KARRERA — User Manual 129
Basic E-MEM Operations
2. Press the Lrn button.
3. Press the keypad number of the desired register.
Learn a Register to a Different Bank
1. Create the effect.
2. Press the Lrn button.
3. Press the Page button (if necessary).
4. Press the button for the desired page: 0, 100-900.
5. Press the Bank button.
6. Press the button of the desired bank.
7. Press the keypad button of the desired E-MEM register.
Alternatively, you can perform the Page and Bank selections, press the Lrn
button, then press the desired register button.
Get and Put
The Put and Get feature buttons are provided in the Master E-MEM area.
Put —Allows you to copy the E-MEM Timeline information from the current
E-MEM register to another E-MEM register.
1. Press the EMEM Edit button in the Master E-MEM area.
2. Press the Put button, the Put menu is displayed.
3. Enter the target register number for the E-MEM you wish to put the
current register’s E-MEM Timeline information, and press
Enter .
Note Pressing the Put button then the Dot “•” button will put the current register
into the next available register.
Get —Allows you to copy the E-MEM Timeline information from another
E-MEM register to the current E-MEM register.
1. Press the EMEM Edit button in the Master E-MEM area.
2. Press the Get button, the Get Register menu is displayed.
3. Enter the target register number for the E-MEM you wish to get the
E-MEM Timeline information from, and press
Enter .
Note Pressing the Get button, Dot “•” button, then Enter clears the current register.
The Master E-MEM area displays a “Clear current?” prompt after pressing the
Get and Dot “•” buttons. Press the Enter button should you wish to continue.