Setdef matchdef – Grass Valley Karrera Video Production Center v.4.0 User Manual
Page 122
122
KARRERA — User Manual
Section 3 — Video Mix/Effects
SetDef MatchDef
The SetDef and MatchDef options permit line rate signal format conversion
of selected Karrera system outputs and inputs. SetDef output and
MatchDef input conversion is licensed in connector pairs. Conversion is
active when the associated Video Processor Frame ME board is present and
the license is enabled. Selecting an output or input button automatically
brings up controls for that conversion.
SetDef and MatchDef are E-MEMable, see E-MEM Control of SetDef
MatchDef
Note
SetDef and MatchDef may be configured as part of engineering setup using
the Eng Setup, SetDef MatchDef menu. If SetDef or MatchDef has been con-
figured as part of engineering setup, this takes precedence over the TD being
able to change these settings, and these items are grayed out in the Source
Ops, SetDef MatchDef menu.
The default for the Source Ops, SetDef MatchDef menu is Auto Line-Rate
enabled. To access the Source Ops, SetDef MatchDef menu, touch
Source
Ops
,
SetDef MatchDef
(
).
Note
MatchDef does not perform frame/rate conversion.
Figure 63. SetDef MatchDef Menu, SetDef Selected