Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 327)

KARRERA — User Manual 327
ClipStore (Image Store Clips)
ClipStore (Image Store Clips)
With the seamless integration of the K2 Summit/Solo technology into the
Image Store menus, you can record and play clips with audio. The Summit
provides four Video/Key channels while the Solo provides two.
Note See the Karrera Installation & Service Manual for engineering configuration
information.
• The ClipStore is supplied to record and playback with AVC-Intra 100 or
DVCPRO HD compression format. Clips imported in DVCPRO HD,
DVCPRO 25/50, DV, and MPEG-2 will play natively.
• The ClipStore supports embedded audio only. The AES inputs and
outputs are not used.
The ClipStore is completely configured and controlled from the Karrera
menu and control panel. There is no need to use the built-in AppCenter
Elite software. In fact, if changes are made to the ClipStore using App-
Center, they will be overwritten by the switcher the next time it sends a con-
figuration to the ClipStore.
Note To change the Summit IP address, see the Karrera Installation & Service
Manual.
This highly integrated solution provides several powerful features,
including:
• Fast access to clips and folders,
• Large storage capacity,
• Non-volatile memory—no loss of images due to power failure,
• Clip control from the Karrera Menu Panel and clip stack control from
the Karrera Control Panel,
• ClipStore device controls (including macros and cues) are E-MEMable,
and
• Make sub-clips from clips and build composite clips with audio.
Summit/Solo Software Version
Version 7.2.7.1403 is the current version of the AppCenter Elite software for
the ClipStore server, as of the release of this manual. The latest version of
the server software is available on the Karrera Software Download site.
CAUTION Do not use AppCenter Elite software for ClipStore from the Summit/Solo
server web site as it may not be compatible.