H3C Technologies H3C S5120 Series Switches - Manual (Page 64)

3-11
To do… Use the command… Remarks
Enter system view system-view —
Enter the
default ISP
domain view
domain domain name
Configure
the AAA
scheme to
be applied to
the domain authentication default
{
local | none |
radius-scheme
radius-scheme-name
[ local ] }
Configure
the
authenticati
on scheme
Quit to
system view
quit
Optional
By default, the local AAA scheme is
applied. If you specify to apply the
local AAA scheme, you need to
perform the configuration concerning
local user as well.
If you specify to apply an existing
scheme by providing the
radius-scheme-name argument, you
need to perform the following
configuration as well:
z Perform AAA-RADIUS
configuration on the switch. (Refer
to AAA Configuration for details.)
z Configure the user name and
password accordingly on the AAA
server. (Refer to the user manual
of AAA server.)
Create a local user and
enter local user view
local-user user-name No local user exists by default.
Set the authentication
password for the local user password { simple |
cipher } password
Required
Specify the service type for
VTY users
service-type telnet Required
Quit to system view quit —
Enter one or more VTY user
interface views user-interface vty
first-number [ last-number ]
—
Configure to authenticate
users locally or remotely authentication-mode
scheme
Required
The specified AAA scheme
determines whether to authenticate
users locally or remotely.
Users are authenticated locally by
default.
Configure the command
level available to users
logging in to the user
interface
user privilege level level
Optional
By default, commands of level 0 are
available to users logging in to the
VTY user interfaces.
Configure the supported
protocol protocol inbound { all | ssh
| telnet }
Optional
Both Telnet protocol and SSH protocol
are supported by default.
Set the command that is
automatically executed
when a user logs into the
user interface
auto-execute command
text
Optional
By default, no command is
automatically executed when a user
logs into a user interface.
Define a shortcut key for
aborting tasks escape-key { default |
character }
Optional
The default shortcut key combination
for aborting tasks is < Ctrl + C >.