H3C Technologies H3C S5120 Series Switches - Manual (Page 441)

1-35
z Add a service named Dot1x auth and set the Service Suffix to bbb, which indicates the
authentication domain for the 802.1X user. With the service suffix configured, you must configure
usernames to be sent to the RADIUS service to carry the domain name.
z Specify UserAcct as the Charging Plan.
z Select Deploy VLAN and set the ID of the VLAN to be assigned to 4.
z Configure other parameters according to the actual situation.
z Click OK to finish the operation.
Figure 1-13 Add a service
# Add a user.
Select the User tab, and select Access User View > All Access Users from the navigation tree to
enter the All Access Users page. Then, click Add to enter the Add Access User page and perform
the following configurations:
z Select the user or add a user named test
z Specify the account name as dot1x and configure the password
z Select the access service Dot1x auth
z Configure other parameters accordingly and click OK to finish the operation