H3C Technologies H3C S5120 Series Switches - Manual (Page 546)

1-8
To do… Use the command… Remarks
Display the statistics of the
CPU usage display cpu-usage [ entry-number
[ offset ] [ verbose ] [ from-device ] ]
Available in any view
Display history statistics of the
CPU usage in a chart display cpu-usage history [ task
task-id ]
Available in any view
Display information about the
device
display device [ verbose ] Available in any view
Display electrical label
information of the device
display device manuinfo Available in any view
Display the temperature
information of devices
display environment Available in any view
Display the operating state of
fans in a device
display fan [ fan-id ] Available in any view
Display the usage of the
memory of a device
display memory Available in any view
Display the power state of a
device
display power Available in any view
Display the reboot type of a
device display reboot-type [ subslot
subslot-number ]
Available in any view
Display the reboot time of a
device
display schedule reboot Available in any view
Display detailed configurations
of the scheduled automatic
execution function
display schedule job Available in any view
Display the exception handling
method
display system-failure Available in any view
Device Management Configuration Examples
Remote Scheduled Automatic Upgrade Configuration Example
Network requirement
z As shown in Figure 1-2 , the current software version is soft-version1 for Device. Upgrade the
software version of Device to soft-version2 and configuration file to new-config at a time when
few services are processed (for example, at 3 am) through remote operations.
z The latest application soft-version2.bin and the latest configuration file new-config.cfg are both
saved under the aaa directory of the FTP server.
z The IP address of Device is 1.1.1.1/24, the IP address of the FTP server is 2.2.2.2/24, and the FTP
server is reachable.
z User can log in to Device via Telnet and a route exists between User and Device.