H3C Technologies H3C S5120 Series Switches - Manual (Page 360)

3-6
Figure 3-2 Network diagram for priority mapping table and priority marking configuration
Configuration procedure
1) Configure trusting port priority
# Set the port priority of GigabitEthernet 1/0/1 to 3.
system-view
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] qos priority 3
[Device-GigabitEthernet1/0/1] quit
# Set the port priority of GigabitEthernet 1/0/2 to 4.
[Device] interface gigabitethernet 1/0/2
[Device-GigabitEthernet1/0/2] qos priority 4
[Device-GigabitEthernet1/0/2] quit
# Set the port priority of GigabitEthernet 1/0/3 to 5.
[Device] interface gigabitethernet 1/0/3
[Device-GigabitEthernet1/3] qos priority 5
[Device-GigabitEthernet1/3] quit
2) Configure the priority mapping table
# Configure the 802.1p-to-local priority mapping table to map 802.1p priority values 3, 4, and 5 to local
precedence values 2, 6, and 4.
[Device] qos map-table dot1p-lp
[Device-maptbl-dot1p-lp] import 3 export 2
[Device-maptbl-dot1p-lp] import 4 export 6
[Device-maptbl-dot1p-lp] import 5 export 4
[Device-maptbl-dot1p-lp] quit