H3C Technologies H3C S5120 Series Switches - Manual (Page 44)

2-5
Authentication
mode
Console port login configuration Description
Specify to
perform local
authentication
or RADIUS
authentication
AAA configuration
specifies whether
to perform local
authentication or
RADIUS
authentication Optional
Local authentication is performed by
default.
Refer to the AAA Configuration for
details.
Configure user
name and
password
Configure user
names and
passwords for
local/remote users
Required
z The user name and password of
a local user are configured on the
switch.
z The user name and password of
a remote user are configured on
the RADIUS server. Refer to user
manual of RADIUS server for
details.
Manage AUX
users Set service type for
AUX users
Required
Scheme
Perform
common
configuration Perform common
configuration for
Console port login Optional
Refer to Common Configuration for
details.
Changes of the authentication mode of Console port login will not take effect unless you exit and enter
again the CLI.
Console Port Login Configuration with Authentication Mode Being
None
Configuration Procedure
Follow these steps to perform Console port login configuration (with authentication mode being none):
To do… Use the command… Remarks
Enter system view system-view —
Enter AUX user interface view user-interface aux 0 —
Configure not to authenticate
users
authentication-mode none
Required
By default, users logging in through
the Console port are not
authenticated.
Configure
the Console
port
Set the baud
rate
speed speed-value
Optional
The default baud rate of an AUX
port (also the Console port) is 9,600
bps.