Configuration procedure, Verification – H3C Technologies H3C S5120 Series Switches User Manual

Page 163

2-10

Configure GigabitEthernet 1/0/1 to operate in manual voice VLAN assignment mode. Configure

GigabitEthernet 1/0/1 to allow voice traffic with an OUI address of 0011-2200-0000, a mask of

ffff-ff00-0000, and a description string test to be forwarded through the voice VLAN.

Figure 2-4 Network diagram for manual voice VLAN assignment mode configuration

Configuration procedure

# Configure the voice VLAN to operate in security mode. (Optional. A voice VLAN operates in security

mode by default.)

system-view

[DeviceA] voice vlan security enable

# Add a recognizable OUI address 0011-2200-0000.

[DeviceA] voice vlan mac-address 0011-2200-0000 mask ffff-ff00-0000 description test

# Create VLAN 2.

[DeviceA] vlan 2

[DeviceA-vlan2] quit

# Configure GigabitEthernet 1/0/1 to operate in manual voice VLAN assignment mode.

[DeviceA] interface gigabitethernet 1/0/1

[DeviceA-GigabitEthernet1/0/1] undo voice vlan mode auto

# Configure GigabitEthernet 1/0/1 as a hybrid port.

[DeviceA-GigabitEthernet1/0/1]port link-type access

Please wait... Done.

[DeviceA-GigabitEthernet1/0/1]port link-type hybrid

# Configure the voice VLAN (VLAN 2) as the default VLAN of GigabitEthernet 1/0/1 and configure

GigabitEthernet 1/0/1 to permit the voice traffic of VLAN 2 to pass through untagged.

[DeviceA-GigabitEthernet1/0/1] port hybrid pvid vlan 2

[DeviceA-GigabitEthernet1/0/1] port hybrid vlan 2 untagged

# Enable voice VLAN on GigabitEthernet 1/0/1.

[DeviceA-GigabitEthernet1/0/1] voice vlan enable

Verification

# Display the OUI addresses, OUI address masks, and description strings supported currently.

display voice vlan oui

Oui Address Mask Description