H3C Technologies H3C S7500E Series Switches - Manual (Page 77)

3-38
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see Configuration
Requirements .
Configuration procedure
Follow these steps to configure scheme authentication for modem login:
To do… Use the command… Remarks
Enter system view system-view —
Enter AUX user interface
view
user-interface aux first-number
[ last-number ]
—
Specify the scheme
authentication mode
authentication-mode scheme
Required
Whether local, RADIUS, or
HWTACACS authentication is
adopted depends on the configured
AAA scheme.
By default, the modem login
authentication mode of the device
that has a separate AUX port is
password, and that of the device
with the console and AUX port
sharing the same physical port is
none.
Enable command
authorization
command authorization
Optional
z By default, command
authorization is not enabled.
z By default, command level for a
login user depends on the user
privilege level. The user is
authorized the command with
the default level not higher than
the user privilege level. With the
command authorization
configured, the command level
for a login user is determined by
both the user privilege level and
AAA authorization. If a user
executes a command of the
corresponding command level,
the authorization server checks
whether the command is
authorized. If yes, the command
can be executed.