H3C Technologies H3C S7500E Series Switches - Manual (Page 53)

3-14
To do… Use the command… Remarks
Configure the type
of terminal display
terminal type { ansi | vt100 }
Optional
By default, the terminal display type
is ANSI.
The device supports two types of
terminal display: ANSI and VT100. It
is recommended to set the display
type of both the device and the client
to VT100. If the device and the client
use different display types (for
example, hyper terminal or Telnet
terminal) or both are set to ANSI,
when the total number of characters
of the currently edited command line
exceeds 80, an anomaly such as
cursor corruption or abnormal
display of the terminal display may
occur on the client.
Configure the user
privilege level for
login users
user privilege level level
Optional
By default, the default command
level is 3 for the console user
interface.
Set the maximum
number of lines on
the next screen.
screen-length screen-length
Optional
By default, the next screen displays
24 lines.
A value of 0 disables the function.
Set the size of
history command
buffer
history-command max-size
value
Optional
By default, the buffer saves 10
history commands at most.
Set the
idle-timeout timer
idle-timeout minutes [ seconds ]
Optional
The default idle-timeout is 10
minutes. The system automatically
terminates the user’s connection if
there is no information interaction
between the device and the user
within the idle-timeout time.
Setting idle-timeout to 0 disables the
timer.