Configuring common settings, For console login (optional) – H3C Technologies H3C S7500E Series Switches User Manual
Page 51
3-12
z
Reference the created HWTACACS scheme in the ISP domain. For more information, see AAA
Configuration in the Security Configuration Guide.
When users adopt the scheme mode to log in to the device, the level of the commands that the users
can access depends on the user privilege level defined in the AAA scheme.
z
When the AAA scheme is local, the user privilege level is defined by the authorization-attribute
level level command.
z
When the AAA scheme is RADIUS or HWTACACS, the user privilege level is configured on the
RADIUS or HWTACACS server.
z
For more information about AAA, RADIUS, and HWTACACS, see AAA Configuration in the
Security Configuration Guide.
After the configuration, when you log in to the device through the console port, you are prompted to
enter a login username and password. A prompt such as
and username and press Enter, as shown in
Figure 3-8 Configuration page
Configuring Common Settings for Console Login (Optional)
Follow these steps to configure common settings for console port login
To do…
Use the command…
Remarks
Enters system view
system-view
—
Enable display of copyright
information
copyright-info enable
Optional
Enabled by default.
Enter AUX user interface view
user-interface aux first-number
[ last-number ]
—