H3C Technologies H3C S7500E Series Switches - Manual (Page 158)

10-14
To do… Use the command… Remarks
Display the patch information display patch information Available in any view
Software Upgrade Configuration Example
Immediate Upgrade Configuration Example (Distributed Device)
Network requirements
z As shown in Figure 10-7 , the current software version is soft-version1, and Boot ROM version is
bootrom-version1 for the device. Immediately upgrade the software version and Boot ROM
version of the device to soft-version2 and bootrom-version2 respectively through remote
operations.
z The latest applications soft-version2.app and bootrom-version2.btm are both saved in the aaa
directory of the FTP server.
z The IP address of the device is 1.1.1.1/24, the IP address of the FTP server is 2.2.2.2/24, and the
device and the FTP server can reach each other.
z A user has logged in to the device via Telnet and the user and device can reach each other.
Figure 10-7 Network diagram for immediate upgrade
FTP Client
FTP Server
User
Telnet
Device
1.1.1.1/24
2.2.2.2/24
Internet
Configuration procedure
z Configuration on the FTP server (Configurations may vary with different types of servers)
# Enable the FTP server.
system-view
[FTP-Server] ftp server enable
# Set the FTP username to aaa and password to hello.
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
# Configure the user to have access to the aaa directory.
[FTP-Server-luser-aaa] service-type ftp
[FTP-Server-luser-aaa] authorization-attribute work-directory flash:/aaa