H3C Technologies H3C S7500E Series Switches - Manual (Page 123)

8-2
Format Description Length Example
file-name
Specifies a file under the current
working directory.
1 to 91
characters
a.cfg indicates a file named a.cfg
under the current working
directory. If the current working
directory is on the AMB, a.cfg
represents file a.cfg on the AMB; if
the current working directory is on
the SMB, a.cfg represents file
a.cfg on the SMB.
path/file-name
Specifies a file in the specified
folder under the current working
directory. path represents the
folder name. You can specify
multiple folders, indicating a file
under a multi-level folder.
1 to 135
characters
test/a.cfg indicates a file named
a.cfg in the test folder under the
current working directory.
drive:/[path]/file-na
me
Specifies a file in the specified
storage medium on the device.
drive represents the storage
medium name. The storage
medium on the AMB is usually
flash or cf; the storage medium on
the SMB is usually slotX#flash or
slotX#cf, where X represents the
number of the slot where the SMB
resides. For example, slot1#flash.
You can use the display device
command to view the
correspondence between a board
and its slot number.
1 to 135
characters
flash:/test/a.cfg indicates a file
named a.cfg in the test folder
under the root directory of the flash
memory on the AMB.
To read and write the a.cfg file
under the root directory of the flash
on the SMB (with the slot number
1), input slot1#flash:/a.cfg for the
filename.
Filename formats (distributed IRF device):