H3C Technologies H3C S7500E Series Switches - Manual (Page 103)

6-7
To do… Use the command… Remarks
Use another username to relog in after
successfully logging in to the FTP server
user username [ password ] Optional
Maintaining and Debugging an FTP Connection
After a device serving as the FTP client has established a connection with the FTP server (For how to
establish an FTP connection, refer to Establishing an FTP Connection .), you can perform the following
operations to locate and diagnose problems encountered in an FTP connection:
To do… Use the command… Remarks
Display the help information of
FTP-related commands supported by
the remote FTP server
remotehelp [ protocol-command ] Optional
Enable information display in a detailed
manner
verbose
Optional
Enabled by default
Enable FTP related debugging when the
device acts as the FTP client
debugging
Optional
Disabled by default
Terminating an FTP Connection
After the device serving as the FTP client has established a connection with the FTP server (For how
to establish an FTP connection, refer to Establishing an FTP Connection .), you can use any of the
following commands to terminate an FTP connection:
To do… Use the command… Remarks
Terminate the connection to the FTP
server without exiting FTP client view
disconnect
Optional
Equal to the close command.
Terminate the connection to the FTP
server without exiting FTP client view
close
Optional
Equal to the disconnect
command.
Terminate the connection to the FTP
server and return to user view
bye
Optional
Equal to the quit command in
FTP client view.
Terminate the connection to the FTP
server and return to user view
quit
Optional
Available in FTP client view,
equal to the bye command.