H3C Technologies H3C S7500E Series Switches - Manual (Page 156)

10-12
To do… Use the command… Remarks
Activate the specified patches
patch active patch-number chassis
chassis-number slot slot-number
Required
Confirming Running Patches
After you confirm the running of a patch, the patch state becomes RUNNING, and the patch is in the
normal running stage. After the device is reset or rebooted, the patch is still valid.
Follow these steps to confirm the running of patches: (distributed device)
To do… Use the command… Remarks
Enter system view system-view —
Confirm the running of the
specified patches
patch run patch-number [ slot
slot-number ]
Required
Follow these steps to confirm the running of patches: (distributed IRF member device)
To do… Use the command… Remarks
Enter system view system-view —
Confirm the running of the
specified patches
patch run patch-number [ chassis
chassis-number slot slot-number ]
Required
This operation is applicable to patches in the ACTIVE state only.
Step-by-Step Patch Uninstallation
Step-by-Step Patch Uninstallation Task List
Task Remarks
Stopping Running Patches Required
Deleting Patches Required
Stopping Running Patches
When you stop running a patch, the patch state becomes DEACTIVE, and the system runs in the way
before it is installed with the patch.
Follow these steps to stop running patches: (distributed device)