Console login authentication modes – H3C Technologies H3C S7500E Series Switches User Manual
Page 44
3-5
Figure 3-5 Configuration page
Execute commands to configure the device or check the running status of the device. To get help,
type ?.
Console Login Authentication Modes
Three authentication modes are available for console port login: none, password, and scheme.
z
none: Requires no username and password at the next login through the console port. This mode
is insecure.
z
password: Requires password authentication at the next login through the console port. Keep
your password. If you lose your password, see H3C Series Ethernet Switches Login Password
Recovery Manual for password recovery.
z
scheme: Requires username and password authentication at the next login through the console
port. Authentication falls into local authentication and remote authentication. To use local
authentication, configure a local user and related parameters. To use remote authentication,
configure the username and password on the remote authentication server. For more information
about authentication modes and parameters, see AAA Configuration in the Security
Configuration Guide. Keep your username and password. If you lose your password, see H3C
Series Ethernet Switches Login Password Recovery Manual for password recovery.
The following table lists console port login configurations for different authentication modes:
Authenticati
on mode
Configuration
Remarks
None
Configure not to authenticate users
For more information, see
.
Password
Configure to authenticate users by using the local password
For more information, see