H3C Technologies H3C S7500E Series Switches - Manual (Page 60)

3-21
To do… Use the command… Remarks
Enable command accounting command accounting
Optional
z By default, command
accounting is disabled. The
accounting server does not
record the commands executed
by users.
z Command accounting allows
the HWTACACS server to
record all executed commands
that are supported by the
device, regardless of the
command execution result. This
helps control and monitor user
operations on the device. If
command accounting is
enabled and command
authorization is not enabled,
every executed command is
recorded on the HWTACACS
server. If both command
accounting and command
authorization are enabled, only
the authorized and executed
commands are recorded on the
HWTACACS server.
Exit to system view quit —
Enter the default ISP
domain view
domain domain-name
Configure
the
authentic
ation
mode Specify the AAA
scheme to be applied to
the domain
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name
[ local ] | local | none |
radius-scheme
radius-scheme-name [ local ] }
Optional
By default, the AAA scheme is
local.
If you specify the local AAA
scheme, perform the configuration
concerning local user as well. If you
specify an existing scheme by
providing the radius-scheme-name