H3C Technologies H3C S7500E Series Switches - Manual (Page 163)

11-1
11
Device Management
The S7500E Series Ethernet Switches are distributed devices supporting Intelligent Resilient
Framework (IRF). Two S7500E series can be connected together to form a distributed IRF device. If
an S7500E series is not in any IRF, it operates as a distributed device; if the S7500E series is in an
IRF, it operates as a distributed IRF device. For introduction of IRF, refer to IRF Configuration in the
IRF Configuration Guide.
When configuring device management, go to these sections for information you are interested in:
z Device Management Overview
z Device Management Configuration Task List
z Configuring the Device Name
z Configuring the System Clock
z Enabling/Disabling the Display of Copyright Information
z Configuring a Banner
z Configuring the Exception Handling Method
z Rebooting a Device
z Scheduled Task Configuration
z Configuring Temperature Alarm Thresholds for a board
z Clearing the 16-bit Interface Indexes Not Used in the Current System
z Configuring the System Load Sharing Function
z Enabling Active/Standby Mode for Service Ports on SRPUs
z Configuring the Traffic Forwarding Mode of SRPUs
z Configuring the Working Mode of LPUs
z Enabling the Port Down Function Globally
z Enabling Expansion Memory Data Recovery Function on a board
z Identifying and Diagnosing Pluggable Transceivers
z Displaying and Maintaining Device Management Configuration
Device Management Overview
Through the device management function, you can view the current working state of a device,
configure running parameters, and perform daily device maintenance and management.