H3C Technologies H3C S7500E Series Switches - Manual (Page 59)

3-20
To do… Use the command… Remarks
Enters system view system-view —
Enable telnet telnet server enable
Required
By default, the telnet service is
enabled.
Enter one or multiple VTY user
interface views
user-interface vty first-number
[ last-number ]
—
Specify the scheme authentication
mode
authentication-mode scheme
Required
Whether local, RADIUS, or
HWTACACS authentication is
adopted depends on the
configured AAA scheme.
By default, local authentication is
adopted.
Enable command authorization command authorization
Optional
By default, command authorization
is not enabled.
z Create a HWTACACS scheme,
and specify the IP address of
the authorization server and
other authorization parameters.
For more information, see AAA
Configuration in the Security
Configuration Guide.
z Reference the created
HWTACACS scheme in the ISP
domain. For more information,
see AAA Configuration in the
Security Configuration Guide.