H3C Technologies H3C S7500E Series Switches - Manual (Page 169)

11-7
Configuration
System clock displayed by the
display clock command
Example
If date-time is not in the daylight
saving time range, the system
clock configured is date-time.
Configure: clock timezone
zone-time add 1, clock
summer-time ss one-off 1:00
2008/1/1 1:00 2008/8/8 2 and
clock datetime 1:30 2008/1/1
System clock configured: 23:30:00
zone-time Mon 12/31/2007
[1], 2, 3 and 1 or [1], 3, 2 and 1
date-time is in the daylight saving
time range:
If the value of
“date-time”-“summer-offset” is not
in the summer-time range, the
system clock configured is
“date-time”-“summer-offset”;
If the value of
“date-time”-“summer-offset” is in
the summer-time range, the
system clock configured is
date-time.
Configure: clock timezone
zone-time add 1, clock
summer-time ss one-off 1:00
2008/1/1 1:00 2008/8/8 2 and
clock datetime 3:00 2008/1/1
System clock configured: 03:00:00
ss Tue 01/01/2008
Enabling/Disabling the Display of Copyright Information
z With the display of copyright information enabled, the copyright information is displayed when a
user logs in through Telnet or SSH, or when a user quits user view after logging in to the device
through the console port or AUX port. The copyright information will not be displayed under other
circumstances. The display format of copyright information is as shown below:
****************************************************************************
* Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
****************************************************************************
z With the display of copyright information disabled, under no circumstances will the copyright
information be displayed.
Follow these steps to enable/disable the display of copyright information:
To do… Use the command… Remarks
Enter system view system-view —