H3C Technologies H3C S7500E Series Switches - Manual (Page 46)

3-7
To do… Use the command… Remarks
Enter system view system-view —
Enter AUX user interface view
user-interface aux first-number
[ last-number ]
—
Specify the none authentication
mode
authentication-mode none
Required
By default, you can log in to the
device through the console port
without authentication, and have
user privilege level 3 after login.
Configure common settings for
AUX user interface view
—
Optional
See Configuring Common Settings
for Console Login (Optional) .
After the configuration, when you log in to the device through the console port at the next time, you are
prompted to press enter. A prompt such as appears after you press Enter, as shown in Figure
3-6 .
Figure 3-6 Configuration page
Configuring Password Authentication for Console Login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see Configuration
Requirements .