H3C Technologies H3C S7500E Series Switches - Manual (Page 49)

3-10
To do… Use the command… Remarks
Enable command accounting command accounting
Optional
z By default, command accounting
is disabled. The accounting
server does not record the
commands executed by users.
z Command accounting allows the
HWTACACS server to record all
the commands executed by
users, regardless of command
execution results. This helps
control and monitor user
operations on the device. If
command accounting is enabled
and command authorization is
not enabled, every executed
command is recorded on the
HWTACACS server. If both
command accounting and
command authorization are
enabled, only the authorized and
executed commands are
recorded on the HWTACACS
server.
Return to system view quit —
Enter the ISP
domain view
domain domain-name
Configure
the
authentic
ation
mode
Apply the
specified AAA
scheme to the
domain
authentication default
{ hwtacacs-scheme
hwtacacs-scheme-name [ local ] |
local | none | radius-scheme
radius-scheme-name [ local ] }
Optional
By default, the AAA scheme is
local.
If you specify the local AAA scheme,
you need to perform local user
configuration. If you specify an
existing scheme by providing the