H3C Technologies H3C S7500E Series Switches - Manual (Page 184)

11-22
To do… Use the command… Remarks
Configure the working mode of an
EA LPU
switch-mode { bridging |
routing } slot slot-number
Optional
By default, the working mode of an
EA LPU is determined by the
SRPU model and the current traffic
forwarding mode of the SRPU.
Refer to Table 11-2 for details.
Table 11-2 Default working mode of EA LPUs
SRPU model
Current traffic forwarding mode
of the SRPU
Default working mode of EA
LPUs
LSQ1SRP2XB
LSQ1SRPA
LSQ1SRPB
LSQ1MPUA
LSQ1CGV24PSC
LSQ1CGP24TSC
LSQ1SRPD
LSQ1MPUB
LSQ1SRP12GB
l2-enhanced or standard routing
l2-enhanced or
standard-bridging
bridging
LSQ1SRP1CB
standard-routing routing