H3C Technologies H3C S7500E Series Switches - Manual (Page 68)

3-29
Configuring the SSH Client to Log In to the SSH Server
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For how to log in to the device with default configuration, see Configuration
Requirements .
Figure 3-15 Log in to another device from the current device
If the telnet client and the telnet server are not in the same subnet, make sure that the two devices can
reach each other.
Configuration procedure
Follow these steps to configure the SSH client to log in to the SSH server:
To do… Use the command… Remarks
Log in to an IPv4 SSH server ssh2 server
Required
server is the IPv4 address or host
name of the server.
Available in user view
Log in to an IPv6 SSH server ssh2 ipv6 server
Required
server is the IPv6 address or host
name of the server.
Available in user view
You can configure other settings for the SSH client to work with the SSH server. For more information,
see SSH2.0 in the Security Command Reference.