H3C Technologies H3C S7500E Series Switches - Manual (Page 114)

6-18
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 1 slot
1!
boot-loader file chassis2#slot0#flash:/newest.app chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2 slot
0!
boot-loader file chassis2#slot1#flash:/newest.app chassis 1 slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on chassis 2 slot
1!
# Reboot the device, and the startup file is updated at the system reboot.
reboot
The startup file used for the next startup must be saved under the root directory of the storage medium.
You can copy or move a file to the root directory of the storage medium. For the details of the
boot-loader command, refer to Upgrading Software Commands in the Fundamentals Command
Reference.
Displaying and Maintaining FTP
To do… Use the command… Remarks
Display the configuration of the FTP client
display ftp client
configuration
Available in any view
Display the configuration of the FTP server display ftp-server Available in any view
Display detailed information about logged-in
FTP users
display ftp-user Available in any view