H3C Technologies H3C S7500E Series Switches - Manual (Page 16)

1-5
Exiting the Current View
The CLI is divided into different command views. Each view has a set of specific commands and
defines the effective scope of the commands. The commands available to you at any given time
depend on the view you are in.
Follow the step below to exit the current view:
To do… Use the command… Remarks
Return to the parent view from the
current view
quit
Required
Available in any view.
z Executed in user view, the quit command terminates the current connection between the terminal
and the device.
z In public key code view, use the public-key-code end command to return to the parent view
(public key view). In public key view, use the peer-public-key end command to return to system
view.
Returning to User View
This feature allows you to return to user view from any other view, without the need to execute the quit
command repeatedly. You can also press Ctrl+Z to return to user view from the current view.
Follow the step below to exit to user view:
To do… Use the command… Remarks
Return to user view return
Required
Available in any view except user
view
Using the CLI Online Help
At the CLI, you can type a question mark (?) to obtain online help. See the following examples.
1) Type ? in any view to display all commands available in this view and brief descriptions for these
commands. For example:
?
User view commands:
archive Specify archive settings
backup Backup next startup-configuration file to TFTP server
boot-loader Set boot loader