H3C Technologies H3C S10500 Series Switches - Manual (Page 461)

446
To do… Use the command… Remarks
Configure the router as a route
reflector and specify an IPv6
MBGP peer or a peer group as its
client
peer { ipv6-group-name |
ipv6-address } reflect-client Required
Not configured by default.
Enable route reflection between
clients
reflect between-clients
Optional
Enabled by default.
Configure the cluster ID of the route
reflector
reflector cluster-id cluster-id
Optional
By default, a route reflector uses its
router ID as the cluster ID.
NOTE:
•
The clients of a route reflector should not be fully meshed, and the route reflector reflects the routes of a
client to the other clients. If the clients are fully meshed, you must disable route reflection between clients
to reduce routing costs.
• If a cluster has multiple route reflectors, you must specify the same cluster ID for these route reflectors to
avoid routing loops.
Displaying and maintaining IPv6 MBGP
Displaying IPv6 MBGP
To do… Use the command… Remarks
Display IPv6 MBGP peer group
information display bgp ipv6 multicast group [ ipv6-group-name ] [ |
{ begin | exclude | include } regular-expression ] Available in
any view
Display IPv6 MBGP routing
information injected with the
network command
display bgp ipv6 multicast network [ | { begin | exclude
| include } regular-expression ] Available in
any view
Display the IPv6 MBGP AS path
information of routes display bgp ipv6 multicast paths [ as-regular-expression
| | { begin | exclude | include } regular-expression ] Available in
any view
Display IPv6 MBGP peer
information or peer group
information
display bgp ipv6 multicast peer [ [ ipv6-address ]
verbose ] [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display the prefix entries in the
ORF information of the specified
BGP peer
display bgp ipv6 multicast peer ipv6-address received
ipv6-prefix [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display IPv6 MBGP routing table
information
display bgp ipv6 multicast routing-table [ ipv6-address
prefix-length ] [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display IPv6 MBGP routing
information that matches an AS
path ACL display bgp ipv6 multicast routing-table as-path-acl
as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
Available in
any view