Ipv6 bidir-pim configuration example, Network requirements – H3C Technologies H3C S10500 Series Switches User Manual
Page 437
422
Expires: 00:01:51
prefix/prefix length: FFDE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFEE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFFE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
IPv6 BIDIR-PIM configuration example
Network requirements
•
In the IPv6 BIDIR-PIM domain shown in
. Source 1 and Source 2 send different IPv6
multicast information to IPv6 multicast group FF14::101. Host A and Host B receive IPv6 multicast
information from the two sources.
•
VLAN interface 102 of Switch C acts as a C-BSR, and loopback interface 0 acts as a C-RP of the IPv6
BIDIR-PIM domain.
•
MLDv1 will run between Switch B and Host A and between Switch D and Host B.