beautypg.com

Pim-sm non-scoped zone configuration example, Network requirements – H3C Technologies H3C S10500 Series Switches User Manual

Page 195

background image

180

VPN-Instance: public net

Total 1 (*, G) entry; 1 (S, G) entry

(*, 225.1.1.1)

Protocol: pim-dm, Flag: WC

UpTime: 00:04:25

Upstream interface: NULL

Upstream neighbor: NULL

RPF prime neighbor: NULL

Downstream interface(s) information:

Total number of downstreams: 1

1: Vlan-interface100

Protocol: igmp, UpTime: 00:04:25, Expires: never

(10.110.5.100, 225.1.1.1)

Protocol: pim-dm, Flag: ACT

UpTime: 00:06:14

Upstream interface: Vlan-interface103

Upstream neighbor: 192.168.1.2

RPF prime neighbor: 192.168.1.2

Downstream interface(s) information:

Total number of downstreams: 1

1: Vlan-interface100

Protocol: pim-dm, UpTime: 00:04:25, Expires: never

# View the PIM routing table information on Switch D.

[SwitchD] display pim routing-table

VPN-Instance: public net

Total 0 (*, G) entry; 1 (S, G) entry

(10.110.5.100, 225.1.1.1)

Protocol: pim-dm, Flag: LOC ACT

UpTime: 00:03:27

Upstream interface: Vlan-interface300

Upstream neighbor: NULL

RPF prime neighbor: NULL

Downstream interface(s) information:

Total number of downstreams: 2

1: Vlan-interface103

Protocol: pim-dm, UpTime: 00:03:27, Expires: never

2: Vlan-interface102

Protocol: pim-dm, UpTime: 00:03:27, Expires: never

PIM-SM non-scoped zone configuration example

Network requirements

As shown in

Figure 54

, receivers receive VOD information through multicast. The receiver groups of

different organizations form stub networks, and one or more receiver hosts exist in each stub

network. The entire PIM-SM domain contains only one BSR.