H3C Technologies H3C S10500 Series Switches User Manual
Page 239
224
[SwitchC-Vlan-interface102] quit
[SwitchC] interface vlan-interface 200
[SwitchC-Vlan-interface200] igmp enable
[SwitchC-Vlan-interface200] pim sm
[SwitchC-Vlan-interface200] quit
[SwitchC] interface vlan-interface 104
[SwitchC-Vlan-interface104] pim sm
[SwitchC-Vlan-interface104] quit
The configuration on Switch A, Switch B, Switch D, Switch E, Switch F, and Switch G is similar to that on
Switch C. (details not shown)
# Configure PIM domain borders on Switch B.
[SwitchB] interface vlan-interface 103
[SwitchB-Vlan-interface103] pim bsr-boundary
[SwitchB-Vlan-interface103] quit
The configuration on Switch C, Switch D, and Switch F is similar to that on Switch B. (details not shown)
3.
Configure C-BSRs and C-RPs
# Configure Loopback 0 as a C-BSR and a C-RP on Switch A.
[SwitchA] pim
[SwitchA-pim] c-bsr loopback 0
[SwitchA-pim] c-rp loopback 0
[SwitchA-pim] quit
The configuration on Switch D and Switch G is similar to that on Switch A. (details not shown)
4.
Configure BGP, and redistribute BGP routing information into OSPF, and OSPF routing
information into BGP.
# Configure the EBGP peer, and redistribute OSPF routing information on Switch B.
[SwitchB] bgp 100
[SwitchB-bgp] router-id 1.1.1.2
[SwitchB-bgp] peer 10.110.3.2 as-number 200
[SwitchB-bgp] import-route ospf 1
[SwitchB-bgp] quit
# Configure the EBGP peer, and redistribute OSPF routing information on Switch D.
[SwitchD] bgp 200
[SwitchD-bgp] router-id 2.2.2.2
[SwitchD-bgp] peer 10.110.3.1 as-number 100
[SwitchD-bgp] import-route ospf 1
[SwitchD-bgp] quit
# Configure the EBGP peer, and redistribute OSPF routing information on Switch C.
[SwitchC] bgp 100
[SwitchC-bgp] router-id 1.1.1.3
[SwitchC-bgp] peer 10.110.4.2 as-number 200
[SwitchC-bgp] import-route ospf 1
[SwitchC-bgp] quit
# Configure the EBGP peer, and redistribute OSPF routing information on Switch F.
[SwitchF] bgp 200
[SwitchF-bgp] router-id 3.3.3.1