Ipv6 pim-ssm configuration example, Network requirements – H3C Technologies H3C S10500 Series Switches User Manual
Page 442
427
Total 1 RP
Total 1 RP matched
00001. RP Address: 6001::1
MID: 0, Flags: 0x2100000:0
Uptime: 00:05:12
RPF interface: Vlan-interface103
List of 2 DF interfaces:
1: Vlan-interface300
2: Vlan-interface400
IPv6 PIM-SSM configuration example
Network requirements
•
Receivers receive VOD information through multicast. The receiver groups of different organizations
form stub networks, and one or more receiver hosts exist in each stub network. The entire PIM
domain operates in the SSM mode.
•
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
•
Switch D connects to the network that comprises the IPv6 multicast source (Source) through
VLAN-interface 300.
•
Switch A connects to N1 through VLAN-interface 100 and to Switch D and Switch E through
VLAN-interface 101 and VLAN-interface 102 respectively.
•
Switch B and Switch C connect to N2 through their respective VLAN-interface 200 and to Switch E
through VLAN-interface 103 and VLAN-interface 104 respectively.
•
Switch E connects to Switch A, Switch B, Switch C, and Switch D.
•
The SSM group range is FF3E::/64.
•
MLDv2 will run between Switch A and N1 and between Switch B/Switch C and N2.