H3C Technologies H3C S10500 Series Switches User Manual

Page 243

228

[SwitchB] interface vlan-interface 103

[SwitchB-Vlan-interface103] pim sm

[SwitchB-Vlan-interface103] quit

[SwitchB] interface Vlan-interface 101

[SwitchB-Vlan-interface101] pim sm

[SwitchB-Vlan-interface101] quit

[SwitchB] interface loopback 0

[SwitchB-LoopBack0] pim sm

[SwitchB-LoopBack0] quit

[SwitchB] interface loopback 10

[SwitchB-LoopBack10] pim sm

[SwitchB-LoopBack10] quit

[SwitchB] interface loopback 20

[SwitchB-LoopBack20] pim sm

[SwitchB-LoopBack20] quit

The configuration on Switch A, Switch C, Switch D, and Switch E is similar to the configuration on Switch
B.

Configure C-BSRs and C-RPs

# Configure Loopback 10 as a C-BSR and Loopback 20 as a C-RP on Switch B.

[SwitchB] pim

[SwitchB-pim] c-bsr loopback 10

[SwitchB-pim] c-rp loopback 20

[SwitchB-pim] quit

The configuration on Switch D is similar to the configuration on Switch B.

Configure MSDP peers

# Configure an MSDP peer on Loopback 0 of Switch B.

[SwitchB] msdp

[SwitchB-msdp] originating-rp loopback 0

[SwitchB-msdp] peer 2.2.2.2 connect-interface loopback 0

[SwitchB-msdp] quit

# Configure an MSDP peer on Loopback 0 of Switch D.

[SwitchD] msdp

[SwitchD-msdp] originating-rp loopback 0

[SwitchD-msdp] peer 1.1.1.1 connect-interface loopback 0

[SwitchD-msdp] quit

Verify the configuration

You can use the display msdp brief command to view the brief information of MSDP peering

relationships between the switches.
# View the brief MSDP peer information on Switch B.

[SwitchB] display msdp brief

MSDP Peer Brief Information of VPN-Instance: public net

Configured Up Listen Connect Shutdown Down

1 1 0 0 0 0

Peer's Address State Up/Down time AS SA Count Reset Count

This manual is related to the following products: