H3C Technologies H3C S10500 Series Switches - Manual (Page 451)

436
Configuring IPv6 MBGP route redistribution
Follow these steps to configure IPv6 MBGP route redistribution:
To do… Use the command… Description
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 MBGP multicast address
family view
ipv6-family multicast —
Enable default route redistribution
into the IPv6 MBGP routing table
default-route imported
Optional
By default, default route
redistribution is not allowed.
Enable route redistribution from
another routing protocol
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Required
Not enabled by default.
NOTE:
If the default-route imported command is not configured, using the import-route command cannot
redistribute any IGP default route.
Configuring IPv6 MBGP route summarization
To reduce the routing table size on medium and large BGP networks, you must configure route
summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6 multicast routes.
Follow these steps to configure IPv6 MBGP route summarization:
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 MBGP address
family view
ipv6-family multicast —
Configure manual route
summarization
aggregate ipv6-address prefix-length [ as-set |
attribute-policy route-policy-name |
detail-suppressed | origin-policy route-policy-name
| suppress-policy route-policy-name ]*
Required
Not configured by
default.
Advertising a default route to a peer or peer group
Follow these steps to advertise a default route to a peer or peer group
To do… Use the command… Remarks
Enter system view system-view —
Enter BGP view bgp as-number —
Enter IPv6 MBGP address family
view
ipv6-family multicast —