Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 95)

W e b S e r v e r I n t e r f a c e 3-67
processed by the IP Gateway, and may be routed to another port. If this
parameter is set to “Disable,” no packet with a destination address different
from the global/Internet address will be processed. Setting this parameter to
“Disable” will override an “Enable” parameter set under “Filter Non Local
Address” on the NAT Details menu.
Type Defines whether this port is local or global. Default is LAN global. All others
are local.
IP Address IP Address of this port. Default is the value defined in the IP Gateway Circuit
Table.
Mask Mask related to the defined IP Address. Default is the value defined in the IP
Gateway Circuit Table.
The NAT Port Table screen provides an “Add New” button that lets you add
additional addresses.
Figure 3.62 NAT Port Details Screen
The NAT Port Details screen provides the following user-activated buttons:
The NAT Port Status Table (Figure 3.63) displays for each port the processed
packets from specific IP addresses.
Button Function
Submit Sets any values that have been changed.
NAT Details Returns the user to the NAT Details screen.
NAT Port Table Returns the user to the NAT Port Table screen.
Delete NAT Port Deletes the specified NAT Port.
NAT Port Status Displays the NAT Port Status Table screen.