Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 62)

3-34 W A N s u i t e 6 4 5 0
The following user-activated buttons are included on the ATM Quality of
Service Details Screen:
CES Service Details Screen
Clicking on CES under the “Type” column of the table in the Services screen
will display the CES Service Details screen shown in Figure 3.32.
Figure 3.32 CES Service Details Screen
From this screen, you can access and change the parameters listed below. The
new parameters are saved when you click on “Submit” and then perform a
Save and Restart.
VPI Determines VPI used for this CES Internet Working Function (IWF). The
default is 0.
VCI Determines VCI used for this CES IWF. The default is 33.
Service Type Determines if T1/E1 service is structured (Nx64 kbps with or without
signaling) or unstructured (2.048 or 1.544 Mbps raw data stream). You must
Button Function
Submit Sets any values that have been changed.
Virtual Channels Displays configured virtual channels.
QoS Profiles Displays configured QOS profiles.
Delete Profile Deletes this QoS profile if it is currently unused.