Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 34)

3-6 W A N s u i t e 6 4 5 0
Figure 3.4 Network Screen
The Network screen status and configuration parameters are described in the
following paragraphs.
Unit Type Selects the unit type. TU-R represents a CPE terminal unit; TU-C represents a
CO terminal unit.
Values: TU-R, TU-C
Default: TU-R
Expected Repeaters Provisions the number of repeaters in the selected span.
Values: 0 (zero)
Default: 0 (zero)
Span Configuration Represents a span configuration profile in the Span Configuration Profile
Table, which applies to this span. By default, this object will have the value
“DEFVAL” (the index of the default profile).
Values: User Span Profile 1, User Span Profile 2, DEFVAL (Default
Value)
Default: DEFVAL
Span Alarm
Configuration
Represents an Alarm configuration profile in the Endpoint Alarm
Configuration Profile Table. The alarm threshold configuration in the
referenced profile will be used by default for all segment endpoints in this
span. By default, this object will have the value 'DEFVAL' (the index of the
default profile).
Values: User Alarm Profile 1, User Alarm Profile 2, User Alarm
Profile 3, DEFVAL (Default Value)
Default: DEFVAL
Pair-1 Mode Represents the status and detail status information of the span for two-wire
operation.