Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 116)

4-8 W A N s u i t e 6 4 5 0
Discovered Repeaters Displays the number of discovered repeaters in this span.
Line Rate Displays the actual negotiated line rate.
Maximum Line Rate Displays the maximum physical line rate.
Transmission Mode Displays the actual transmission mode (Annex-A or Annex-B).
Expected Repeaters Provisions the number of repeaters in the selected span.
Values: 0
−
8
Default: 0 (zero)
Span Configuration Represents a span configuration profile in the Span Configuration Profile
Table, which applies to this span. By default, this object will have the value
“DEFVAL” (the index of the default profile).
Values: User Span Profile 1, User Span Profile 2, DEFVAL (Default
Value)
Default: DEFVAL
Span Alarm
Configuration
Represents an Alarm configuration profile in the Endpoint Alarm
Configuration Profile Table. The alarm threshold configuration in the
referenced profile will be used by default for all segment endpoints in this
span. Individual endpoints may override this profile by explicitly specifying
some other profile in the table. By default, this object will have the value
'DEFVAL' (the index of the default profile).
Values: User Alarm Profile 1, User Alarm Profile 2, User Alarm
Profile 3, DEFVAL (Default Value)
Default: DEFVAL
Pair 1 Mode Represents the status and details status of the span for two-wire operation.
Pair 2 Mode Represents the status and details status of the span for four-wire operation.
This mode is not supported by the WANsuite 6450.
EOC In Displays the number of messages received on the Embedded Operations
Channel.
EOC Out Displays the number of messages transmitted on the EOC Embedded
Operations Channel.
The Network screen provides the user-activated prompts described below.
Prompt Function
Configuration Profiles Displays the three configuration profiles that can be used.
Alarm Profiles Displays the four alarm profiles that can be used.
Span Endpoints Lists the currently available span endpoints.