Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 31)

W e b S e r v e r I n t e r f a c e 3-3
Figure 3.1 Unit Screen
The Unit screen displays the following fields:
The Unit screen provides the following user-activated buttons:
Field Function
Object ID Display-only field used to point an SNMP agent to this ID.
Up Time Displays the amount of time the unit has been up and running.
Contact Stores the name of a point-of-contact for system failure.
Name Read/write field that holds the unit’s name.
Location Read/write field that holds the unit's location.
FrameStart ID Not used for ATM. Read/write field that holds the unit's ID that
uniquely identifies the unit and is used in the FrameStart
applications.
Blank Fields Read/write fields for user-specific labels and values. Information
resides in non-volatile memory.
Time Read/write field that holds the unit's internal time setting in standard
24-hour HH:MM:SS format.
Date Read/write field that holds the unit's internal date setting in standard
MM/DD/YY format.
Button Function
Submit Sets any values that have been changed. Use the top “Submit”
button to set unit parameters changed in the upper section of the
screen, and the lower “Submit” button to set the real-time clock.