Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 172)

4-64 W A N s u i t e 6 4 5 0
Figure 4.55 Static TCP Translation Table Screen
Global Port Decimal IP Port exposed to the global Internet. Default is 0.
Server Port Decimal IP Port of the local TCP Server. This port is usually the same as the
Global Port. Default is 0.
Server Address IP Address of the local TCP Server. Default is 0.0.0.0.
The “Add New” prompt lets the user add additional addresses.
You can configure or change the above-listed parameters on the Static TCP
Trans Details screen (Figure 4.56), which is accessed by selecting the
appropriate number on the Static TCP Trans Table screen.
Figure 4.56 Static TCP Translation Details Screen
NAT Ports Screen
The parameters on the NAT Ports screen (Figure 4.57) define the NAT global/
Internet and local/Corporate ports. These parameters are configured in the
NAT Ports Details screen shown in Figure 4.58. Access the NAT Ports Details