Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 102)

3-74 W A N s u i t e 6 4 5 0
Enable Enables or disables Bridging capability.
Values: Enable, Disable
Default: Disable
Group Multicast MAC
Address
MAC Address recognized by the Bridge as the group address for the Bridge
Protocol Data Unit (BPDU) transfer between bridges.
Values: Any valid Group Multicast MAC Address
Default: 0180C2000000
Bridge ID Consists of a bridge priority and its own MAC Address.
Values: 1
−
65535
Default: 2
Hello Timer Specifies the BPDU broadcasting interval.
Values: 1
−
65535 s
Default: 10 s
Max Age Timer Specifies the length of time a bridge will consider the network topology held
in memory as valid.
Values: 1
−
65535 s
Default: 60 s
Forward Delay Specifies the length of time to delay creation of a temporary loop in the
network.
Values: 1
−
65535 s
Default: 5 s
Filter Ageing Timer Specifies the length of time an entry in the lookup table will be held if no
traffic is received from the specified MAC Address.
Values: 1
−
65535 s
Default: 300 s
The Bridge Details screen provides the following user-activated buttons:
Button Function
Bridge Port Table Displays the Bridge Port Table screen (Figure 3.73) that lets
the user access and configure the Bridge Port Details screen
(Figure 3.74).
Bridge Lookup Table Displays the Bridge Lookup Table screen (Figure 3.75) that
contains all MAC Addresses learned by the Bridge.
Submit Sets any values that have been changed.