Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 112)

4-4 W A N s u i t e 6 4 5 0
System Screen
The first option on the Main menu screen is the System screen (Figure 4.3).
This screen lets you view and set specific information about the unit in
service.
Figure 4.3 System Screen
The System screen displays the fields shown below.
The System screen displays two user-selectable prompts: Maintenance Reset,
and Save and Restart. Both are described in the paragraphs below.
Field Description
Contact Read/write field used to store the name of a point-of-contact for
system failure.
Name Read/write field that holds the unit’s name.
Location Read/write field that holds the unit's location.
FrameStart ID Not used for ATM. Read/write field that holds the unit's ID that
uniquely identifies the unit and is used in the FrameStart
applications.
Blank Fields Read/write fields for user-specific labels and values. Information
resides in non-volatile memory.
Time Read/write field that holds the unit's internal time setting in
standard 24-hour HH:MM:SS format.
Date Read/write field that holds the unit’s internal time setting in
standard 24-hour MM:DD:YY format.
New Admin
Password
New Read Only
Password Lets you modify your Admin or Read-only password by typing in
a new password. Acceptable characters for use in a password are
digits 0–9 and letters A–Z and a–z, for a total of 62 distinct
characters.