Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 86)

3-58 W A N s u i t e 6 4 5 0
Figure 3.51 Area Table Screen
ID Displays the ID of the Area (represented by an IP Address).
Enable Displays whether the defined Area is enabled or disabled.
Auth Type Indicates Area validation.
Stub Displays whether or not the defined area is a Stub Area.
Address Summary Displays the Address Summary of the defined Area.
Mask Summary Displays the Mask Summary of the defined Area.
Advertise Displays whether advertising is enabled or disabled for this Area.
The “Add New” button on this screen allows you to define a new Area.
Area Details Screen
Access this screen (Figure 3.52) by clicking on a specific Index number on the
Area Table screen.
Figure 3.52 Area Details Screen
Area ID This parameter has the same format as the IP Address of the Mask Address.
Values: 0.0.0.0
−
255.255.255.255
Default: 0.0.0.0
Enable Displays whether or not this Area is enabled.
Values: Enable, Disable
Default: Enable