Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 65)

W e b S e r v e r I n t e r f a c e 3-37
*Only channels allocated to the CBR interface should be set to 56 k/Signaling. When configuring the Serial
interface for CES service (see Serial CES Configuration as described on page 3-39), you must set the
Channel Rate for allocated channels to 64 k.
Channel Table Details Screen
To allocate Channels, or time slots, for CES services, click on the “Channels”
button at the bottom of the CES Service Details screen to bring up the Channel
Table Details screen shown in Figure 3.33.
Figure 3.33 Channel Table Details Screen
The Channel Table Details screen lets you establish the Rate, Service, and
Idle Pattern parameters for any available channel. The screen parameters are
described below.
Basic T1 (D4) T1 D4 Structured Basic 64 k
E1 w/Signaling (ESF) E1 CAS Structured E1Cas 56 k/
Signaling*
T1 w/Signaling (ESF) T1 ESF Structured Ds1EsfCas 56 k/
Signaling*
T1 w/Signaling (D4) T1 D4 Structured Ds1SfCas 56 k/
Signaling*
Unstructured E1 E1 Unframed Unstructured Basic 64 k
Unstructured T1 T1 Unframed Basic 64 k
CES Service
Description
CBR
Framing
CES Service
Type
CES
AAL1
Format
Channel
Rate