Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 141)

V T 1 0 0 I n t e r f a c e 4-33
The ATM Statistics table is divided into two sections: Transmit (first three
columns), and Receive (next three columns). Each section provides real-time
updates (TimeStamp column) on the following statistics:
• Frames
−
current number of good frames transmitted/received
•
Bytes
−
current number of bytes transmitted/received
• Errored Frames
−
current number of frames transmitted/received in error
ATM Virtual Channel Table Screen
Select the “Virtual Channels” prompt on the ATM Service Details screen to
display a table (Figure 4.30) of all Virtual Channels on a specific ATM
service along with their state and alarm conditions.
Figure 4.30 Virtual Channel Table Screen
The Virtual Channel Table displays status information on the parameters
listed below. These parameters are configured on the Virtual Channel Details
screen (Figure 4.31):
VPI Virtual Path Identifier number.
VCI Virtual Channel Identifier number.
Admin Status Current Admin Status.
Values: Up, Down, Testing
Oper Status Current Operation Status.
Values: Up, Down, Testing
Last Change Time and date of the Last Change.
QOS Prof Current QOS profile in use. The default profile is 0 (zero), which is used for
UBR traffic.