Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 52)

3-24 W A N s u i t e 6 4 5 0
Figure 3.21 Unit Access Details
Supervisory
The Supervisory screen (Figure 3.22) displays the current speed of the
Supervisory port interface along with other parameters as described below.
The Supervisory port supports only asynchronous character formats.
Figure 3.22 Supervisory Screen
Speed Changes the Supervisory port speed (in bits per second).
Values: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Default: 19200
Character Size Selects the number of bits required to make up one asynchronous character.
Values: Five, Six, Seven, Eight
Default: Eight
Diagnostic Messages Enables the Supervisory port to send out diagnostic messages upon power-up.
Values: Enable, Disable
Default: Enable
Parity Sets the parity bit.
Values: None, Odd, Even
Default: None